Labelling HaloTag Fusion Proteins with HaloTag Ligand in Living Cells

Materials and Reagents

1. Pipette tips (BioExpress, catalog number: P-1236-200)
   Manufacturer: Biotix, catalog number: P-1236-200CS .
   
2. 35 mm glass bottom dish made in the laboratory (see Video 1 for making glass-bottom dishes)
   
   
   
   Video 1. Making glass-bottom dishes. The video elaborates how to make glass-bottom dishes for live-cell single-molecule imaging.
   
   
3. Cell lines used in protocol: mouse embryonic stem cells and HEK293T cells
   
4. Janelia Fluor 549 dye (JF₅₄₉) provided by Dr. Luke D. Lavis (Janelia Research Campus, Howard Hughes Medical Institute)
   
5. Trypsin-EDTA (Thermo Fisher Scientific, Gibco^TM, catalog number: 25300054 )
   
6. Phosphate-buffered saline (PBS) (Sigma-Aldrich, catalog number: D8537-500ML )
   
7. Gelatin (Sigma-Aldrich, catalog number: G1890-100G )
   
8. DMEM (Sigma-Aldrich, catalog number: D5796 )
   
9. Fetal bovine serum (FBS) (Sigma-Aldrich, catalog number: F0926 )
   
10. Glutamine (Thermo Fisher Scientific, Gibco^TM, catalog number: 25030081 )
    
11. Penicillin-streptomycin (Thermo Fisher Scientific, Gibco^TM, catalog number: 15140122 )
    
12. β-Mercaptoethanol (Thermo Fisher Scientific, Gibco^TM, catalog number: 21985023 )
    
13. Non-essential amino acids (Thermo Fisher Scientific, catalog number: 1114050 )
    
14. Leukemia inhibitor factor (LIF, made in the laboratory)
    
15. FluoroBrite DMEM (Thermo Fisher Scientific, Gibco^TM, catalog number: A1896701 )
    
16. ES cell medium (see Recipes)
    
17. Live-cell imaging medium (see Recipes)
    

Equipment

1. Single channel pipette (BioExpress, Kaysville, USA)
   
2. Heater controller (Warner Instruments, catalog number: TC-324 )
   
3. Microscope (Manual Microscopy) (ZEISS, model: Axio Observer D1 )
   
4. Alpha Plan-Apochromatic 100/1.46 NA Oil-immersion Objective (ZEISS, Germany)
   
5. Evolve 512 x 512 EMCCD camera (Photometrics, Tucson, USA)
   
6. Solid state laser (Intelligent Imaging Innovations, 3i LaserStack with Fiber)
   

Software

1. Slidebook 6.0 software (Intelligent Imaging Innovations, Denver, Colorado)
   
2. MATLAB R2015a (8.5.0.197613) (MathWorks, Natick, USA)
   
3. U-track 2.0 (Danusar Lab, UT South Western Medical Center, Dallas, USA)
   

Procedure

1. Trypsinize 70-90% confluent cells (mouse embryonic stem cells or HEK293 cells) of 100 mm plate stably expressing HaloTag-Cbx proteins (we recommend 0.6 ml of 0.05% trypsin-EDTA [1x] for 60 mm plate and 1.5 ml for 100 mm plate).
   
2. Seed 20% of cells to 35 mm glass-bottom dish coated by Gelatin overnight (Note 1) (see Video 2 for gelatinization).
   
   
   
   Video 2. Gelatinization of glass-bottom dishes. The video describes how to gelatinize glass-bottom dishes before seeding cells.
   
   
3. Following by overnight culture, the final confluency of the cells before was between 80-90%. Several concentrations (5 nM, 15 nM, and 30 nM) of JF₅₄₉ are used to incubate with cells for 15 min at 37 °C in 5% CO₂ (Notes 2 and 3) (see Video 3 for adding the JF₅₄₉ dye).
   
   
   
   Video 3. Adding JF₅₄₉ dyes to cells
   
   
   
4. Gently wash cells with ES medium (see Recipes) once and incubate in ES medium for 30 min at 37 °C and 5% CO₂ (see Video 4 for washing cells).
   
   
   
   Video 4. Washing cells with ES cell medium
   
   
5. Replace ES medium with live-cell imaging medium (see Recipes) (see Video 5 for adding live-cell imaging medium).
   
   
   
   Video 5. Replacing ES cell medium with live-cell imaging medium
   
   
6. Maintain 37 °C conditions during imaging by using a heater controller. Each plate should be imaged for the maximum of 1.5 h after placing on the microscope (see Video 6 for placing dishes on objective).
   
   
   
   Video 6. Placing dishes on objective
   
   
7. The number of individual fluorescent spot per nucleus should be between 10-50 spots, controlled by adjusting the JF₅₄₉ dye concentrations (Notes 4 and 5) (see Video 7 for single-molecule imaging).
   
   
   
   Video 7. Single-molecule imaging. The video describes how to image individual HaloTag-Cbx proteins within living cells.
   
   
8. Movies are then uploaded to u-track 2.0. Each cell is cropped from the larger movie. Cropped movies are processed (Note 6).

Data analysis

1. Our data were analyzed using MATLAB with u-track 2.0 plug-in, detail guide can be found at http://www.utsouthwestern.edu/labs/danuser/software/ (the software and pdf file guide are included in the download).
   
2. Representative images and movies can be found in Zhen et al., 2016.
   

Notes

1. Imaging dishes should be gelatinized overnight.
   
2. We recommend using pipettes, not suction, when removing medium from imaging dishes.
   
3. When add medium to the cells in imaging dishes, we recommend tilting plate at an angle, slowly add medium to the lower edge and let the medium reach the cells slowly.
   
4. The TIRF angle used is unique for individual cells and should be adjusted to achieve the best possible movies.
   
5. To obtain representative movies, the focus of the movie should be at the middle layer of the nucleus. This can be recognized by the deeper black area (this can be achieved by adjusting the angle). Bright field can be used to check the nucleus area.
   
6. In u-track 2.0, multiple movies can be loaded and processed. After being processed, each movie should be checked to ensure that cells should be no drift and rotation.
   

Recipes

1. ES cell medium
   DMEM
   15% FBS
   2 mM glutamine
   100 U/ml penicillin-streptomycin
   0.1 mM β-mercaptoethanol
   1,000 U/ml LIF
   0.1 mM non-essential amino acids
   
2. Live-cell imaging medium
   FluoroBrite DMEM supplemented with 15% FBS
   2 mM glutamine
   100 U/ml penicillin-streptomycin
   0.1  mM β-mercaptoethanol
   1,000 U/ml LIF
   0.1 mM non-essential amino acids
   

Acknowledgments

This work was supported, in whole or in part, by the National Cancer Institute of the National Institutes of Health under Award Number R03CA191443 (to XR). This work was also supported by grants from the CU-Denver Office Research Service (to XR) and the American Cancer Society Grant IRG 57-001-53 subaward (to XR). This protocol was originally developed in Zhen et al., 2016.

References

1. Cuvier, O. and Fierz, B. (2017). Dynamic chromatin technologies: from individual molecules to epigenomic regulation in cells. Nat Rev Genet.
   
2. Grimm, J. B., English, B. P., Chen, J., Slaughter, J. P., Zhang, Z., Revyakin, A., Patel, R., Macklin, J. J., Normanno, D., Singer, R. H., Lionnet, T. and Lavis, L. D. (2015). A general method to improve fluorophores for live-cell and single-molecule microscopy. Nat Methods 12(3): 244-250, 243 p following 250.
   
3. Kusumi, A., Tsunoyama, T. A., Hirosawa, K. M., Kasai, R. S. and Fujiwara, T. K. (2014). Tracking single molecules at work in living cells. Nat Chem Biol 10(7): 524-532.
   
4. Liu, Z., Lavis, L. D. and Betzig, E. (2015). Imaging live-cell dynamics and structure at the single-molecule level. Mol Cell 58(4): 644-659.
   
5. Los, G. V., Encell, L. P., McDougall, M. G., Hartzell, D. D., Karassina, N., Zimprich, C., Wood, M. G., Learish, R., Ohana, R. F., Urh, M., Simpson, D., Mendez, J., Zimmerman, K., Otto, P., Vidugiris, G., Zhu, J., Darzins, A., Klaubert, D. H., Bulleit, R. F. and Wood, K. V. (2008). HaloTag: a novel protein labeling technology for cell imaging and protein analysis. ACS Chem Biol 3(6): 373-382.
   
6. Tatavosian, R., Zhen, C. Y. and Ren, X. J. (2015). Single-molecule fluorescence microscopy methods in chromatin biology. Acs Sym Ser 1215:129-136.
   
7. Zhen, C. Y., Tatavosian, R., Huynh, T. N., Duc, H. N., Das, R., Kokotovic, M., Grimm, J. B., Lavis, L. D., Lee, J., Mejia, F. J., Li, Y., Yao, T. and Ren, X. (2016). Live-cell single-molecule tracking reveals co-recognition of H3K27me3 and DNA targets polycomb Cbx7-PRC1 to chromatin. Elife 5.
   
8. Zheng, Q. and Lavis, L. D. (2017). Development of photostable fluorophores for molecular imaging. Curr Opin Chem Biol 39: 32-38.