Materials and Reagents

50 ml conical tube
Dialysis membrane (Spectra/Por^® Molecularporous membrane tubing, standard RC tubing, MWCO: 3.5 kD) (Spectrum, catalog number: 132720 )
Bio-Rad Chromatography Column (2.5 x 10 cm Econo-Column) (Bio-Rad Laboratories, catalog number: 7311550 )
BL21 competent cells (made in the laboratory)
pGEX-6P-1-GST (GE Healthcare)
Ampicillin
Isopropyl-1-thio-β-D-galactopyranoside (IPTG) (Omega Bio-tek, catalog number: AC121 )
Glutathione Sepharose 4B (GE Healthcare, catalog number: 17075601 )
Phosphate-buffered saline (PBS, pH 7.4)
Pierce^TM Coomassie (Bradford) Protein Assay Kit (Thermo Fisher Scientific, Thermo Scientific^TM, catalog number: 23200 )
Coomassie Blue (Bio-Rad Laboratories, catalog number: 1610786 )
Tryptone
Yeast extract
Sodium chloride (NaCl)
1% Triton X-100
Phenylmethanesulfonyl fluoride (PMSF) (Sigma-Aldrich, catalog number: 93482 )
Protease inhibitor cocktail (Sigma-Aldrich, catalog number: P8340 )
L-glutathione reduced (Sigma-Aldrich, catalog number: G4251 )
LB medium (see Recipes)
Wash buffer (see Recipes)
Lysis buffer (see Recipes)
Elution buffer (see Recipes)

Equipment

Culture flasks (2,000 ml) (NALGENE, U.S.A.)
Shaker
Centrifuges (Eppendorf, model: 5702 R )
Centrifuge bottle
Vibra-Cell^TM sonicator (Sonics & Materials, model: VCX 130 ) with standard probe (1/4”; 6 mm), length 4.5” (113 mm), Titanium alloy Ti-6Al-4V, Autoclavable (Sonics & Materials, catalog number: 630-0435 )
S-3200-2 GyroMixer (BioExpress, model: GeneMate GyroMixer , catalog number: S-3200-2)

Procedure

Note: The experimental procedure was revised from the published protocol (Harper and Speicher, 2011).

Expression of GST fusion protein
1. Transform competent BL21 cells with pGEX-6P-1-GST plasmids that encode the Cbx7 variants by incubating plasmid with cells on ice for 10 min, then heat shock at 42 °C for 45 sec. The mixture was put on ice for 2 min, LB medium was added, and the mixture was incubated for 1 h at 37 °C while shaking at 250-300 rpm. After that, the cells were spread onto agar plate containing ampicillin.
2. Transfer a single, isolated colony of transformed BL21 cells to 100 ml LB medium with 100 µg/ml ampicillin and incubate the inoculated culture overnight at 37 °C while shaking at 250-300 rpm.
3. Transfer 50 ml of the overnight culture into 950 ml of warm, fresh LB medium with 100 µg/ml ampicillin.
4. Incubate the culture at 37 °C while shaking at 250-300 rpm until the OD₆₀₀ is 0.5-0.7 (Note 1).
5. Induce the protein expression by adding IPTG to a final concentration of 1.0 mM (stock concentration: 100 mM, the powder was dissolved in MilliQ water and the solution was filtered before used) and incubating at 37 °C while shaking at 250-300 rpm for 5 h.
6. Harvest cells by centrifugation at 4,000 x g for 20 min at 4 °C.
7. Carefully decant the supernatant, leaving about 15-50 ml in the centrifuge bottle.
8. Resuspend the cells and transfer to a 50 ml conical tube and centrifuge at 4,000 x g for 20 min at 4 °C.
9. Decant the supernatant (Note 2).
Sonication (Note 3)
1. Resuspend the cell pellet in 25 ml of lysis buffer.
2. Lyse cells by sonication at 4 °C using the standard probe with the following settings:
Purification
1. To the mixture after sonication, add Triton X-100 to a final concentration of 1% and mix gently for 30 min at 4 °C with the mixer to increase the solubility of the protein.
2. Centrifuge the mixture at 10,000 x g for 10 min at 4 °C.
3. Wash 0.75 ml of Glutathione Sepharose beads with 3 x 10 ml of cold PBS, centrifuge at 500 x g for 3 min at 4 °C.
4. Transfer the supernatant by pipetting from step C2 to pre-washed beads in a conical tube and rotate at 4 °C for 1 h.
5. Centrifuge at 500 x g for 3 min at 4 °C and remove the supernatant.
6. Wash the beads with 4 x 10 ml of wash buffer.
7. Pour the beads into a Bio-Rad Chromatography Column and wash with 2 x 10 ml of cold PBS.
8. Elute the fusion protein by incubating at room temperature for 10 min with 1 ml elution buffer. Repeat this step to get a total of three elutions.
9. Dialyze against PBS three times.
10. Run SDS-PAGE gel to determine the purity and identity of the fusion protein (Figure 1).
  
  Figure 1. SDS-PAGE gel stained with Coomassie for determination of Cbx7 variant GST-fusion proteins

Data analysis

The Pierce^TM Coomassie (Bradford) Protein Assay Kit (Thermo Scientific) was performed to determine the concentration of the protein. SDS-PAGE gel was used to determine the identity of the proteins by their expected molar mass and also to check for contaminates (if yes, there will be other bands shown together with the protein band). Furthermore, GST protein was run with the SDS-PAGE gel as a control. The gel was stained with Coomassie Blue and is presented in Figure 6-figure supplement 1 in (Zhen et al., 2016): Live-cell single-molecule tracking reveals co-recognition of H3K27me3 and DNA targets polycomb Cbx7-PRC1 to chromatin.

Notes

To monitor the OD, measure the absorbance at 600 nm. Estimate the amount of time by assuming the population of E. coli doubles every 20 min.
The cell pellet from step C10 can be frozen at -80 °C for several months.
For sonication: cell disruption is evidenced by partial clearing of the suspension. Avoid over sonication since it will heat the solution, leading to protein aggregation and denaturation.
After sonication, 1% Triton X-100 was added, Triton X-100 can be replaced with other detergents such as NP-40 or Tween 20.

Recipes

LB medium (Autoclaved, 1 L, pH 7.2)
10 g tryptone
5 g yeast extract
5 g NaCl
Wash buffer
1x PBS + 1% Triton X-100
Lysis buffer
1x PBS
0.1 mM PMSF
0.1 mM protease inhibitor cocktail
Elution buffer
20 mM reduced glutathione, pH 8.0
Adjust pH with NaOH

Acknowledgments

This work was supported, in whole or in part, by the National Cancer Institute of the National Institutes of Health under Award Number R03CA191443 (to XR). This work was also supported by grants from the CU-Denver Office Research Service (to XR) and the American Cancer Society Grant IRG 57-001-53 subaward (to XR).
This protocol was modified from (Harper and Speicher, 2011).

References

Blackledge, N. P., Rose, N. R. and Klose, R. J. (2015). Targeting Polycomb systems to regulate gene expression: modifications to a complex story. Nat Rev Mol Cell Biol 16(11): 643-649.
Cao, R., Wang, L., Wang, H., Xia, L., Erdjument-Bromage, H., Tempst, P., Jones, R. S. and Zhang, Y. (2002). Role of histone H3 lysine 27 methylation in Polycomb-group silencing. Science 298(5595): 1039-1043.
Gao, Z., Zhang, J., Bonasio, R., Strino, F., Sawai, A., Parisi, F., Kluger, Y. and Reinberg, D. (2012). PCGF homologs, CBX proteins, and RYBP define functionally distinct PRC1 family complexes. Mol Cell 45(3): 344-356.
Harper, S. and Speicher, D. W. (2011). Purification of proteins fused to glutathione S-transferase. Methods Mol Biol 681: 259-280.
Kerppola, T. K. (2009). Polycomb group complexes--many combinations, many functions. Trends Cell Biol 19(12): 692-704.
Simon, J. A. and Kingston, R. E. (2013). Occupying chromatin: Polycomb mechanisms for getting to genomic targets, stopping transcriptional traffic, and staying put. Mol Cell 49(5): 808-824.
Tavares, L., Dimitrova, E., Oxley, D., Webster, J., Poot, R., Demmers, J., Bezstarosti, K., Taylor, S., Ura, H., Koide, H., Wutz, A., Vidal, M., Elderkin, S. and Brockdorff, N. (2012). RYBP-PRC1 complexes mediate H2A ubiquitylation at polycomb target sites independently of PRC2 and H3K27me3. Cell 148(4): 664-678.
Wang, H., Wang, L., Erdjument-Bromage, H., Vidal, M., Tempst, P., Jones, R. S. and Zhang, Y. (2004). Role of histone H2A ubiquitination in Polycomb silencing. Nature 431(7010): 873-878.
Zhen, C. Y., Tatavosian, R., Huynh, T. N., Duc, H. N., Das, R., Kokotovic, M., Grimm, J. B., Lavis, L. D., Lee, J., Mejia, F. J., Li, Y., Yao, T. and Ren, X. (2016). Live-cell single-molecule tracking reveals co-recognition of H3K27me3 and DNA targets polycomb Cbx7-PRC1 to chromatin. Elife 5.