Materials and Reagents

The following list provides examples of the materials and equipment that we routinely use in our laboratory. Nevertheless, reagents and equipment with similar specifications will work as well.

Cellstar cell culture multiwell plates (6-24 well) (Greiner Bio-One, catalog numbers: 657 160 [6-well; 665 180 [12-well]; 662 160 [24-well])
Corning 60 mm Ultra-low attachment culture dish (Corning, catalog number: 3261 )
Cell spatula (TPP, catalog number: 99010 )
Serological pipettes (Greiner Bio-One, catalog numbers: 760180 [2 ml]; 606180 [5 ml]; 607180 [10 ml]; 760107 .html"> 760107 [25 ml]; 768160 [50 ml])
Bemis^TM Curwood Parafilm^TM M Laboratory Film (Fisher Scientific, product code HS234526C, catalog number: 10018130 )
Greiner centrifuge tubes (50 ml and 15 ml) (Sigma-Aldrich, manufacturer: Greiner; catalog number for 15 ml: T1818 , for 50 ml: T2318 )
Liquid nitrogen
Corning ^® Matrigel ^®Growth Factor Reduced (GFR) Basement Membrane Matrix, Phenolred-free, LDEV-free (Corning, CAS number: 356231 , format: 10 ml, store at -20 °C and follow instructions from supplier for preparation)
CHIR 99021 (Caymen Chemical, CAS number: 252917-06-9, catalog number: 13122 ; product format: 2.5 mg/ml in DMSO; storage at -20 °C as 6 mM stock; stability: ≥ 2 years)
SB431542 in solution (MACS Miltenyi, CAS number: 130-106-543 , catalog number: 130-106-543 ; product format: 10 mM in DMSO; storage at -20 °C as 10 mM stock, protected from light; stability: 6 months)
Dorsomorphin (StemCell; CAS number: 866405-64-3, catalog number: 72102 ; product format 10 mg solid; storage at -20 °C as 5 mM stock in DMSO (heat applied) or ethanol; stability: 12 months)
Purmorphamin (MACS Miltenyi, CAS number: 483367-10-8; catalog number: 130-104-465 product format: 5 mg solid; storage at -20 °C as 10mM stock in DMSO, protected from light)
(+)-Sodium L-ascorbate (Vitamin C) (Merck, Sigma-Aldrich, catalog number: A4034 ; product format solid powder; store as 200 µM stock in water at -20 °C)
N-2 Supplement (100×) (Thermo Fisher Scientific, Gibco, catalog number: 17502-048 ; product format: 5 ml liquid; store at -20 °C, protected from light; stability: 18 months)
B27 without Vitamin A (50×) (Thermo Fisher Scientific, Gibco, catalog number: 12587010 ; product format: 10 ml liquid; store at -20 °C protected from light)
Neurobasal^® Medium (Thermo Fisher Scientific, Gibco, catalog number: 21103049 ; product format: 500 ml liquid; store at 2-8 °C, protected from light; shelf life: 12 months)
DMEM/F12, HEPES (Thermo Fisher Scientific, Gibco, catalog number: 31330038 ; product format: 500 ml liquid; store at 2-8 °C, protected from light; shelf life: 12 months)
KnockOut DMEM (Thermo Fisher Scientific, Gibco, catalog number: 10829018 ; product format: 500 ml liquid; store at 2-8 °C protected from light
KnockOut Serum replacement (Thermo Fisher Scientific, Gibco, catalog number: 10828010 ; product format: 500 ml liquid; store at -20 °C protected from light
StemMACS^TM iPS-Brew XF, human (MACS Miltenyi Biotec, catalog number: 130-104-368 )
mTeSR^TM1 (STEMCELL Technologies, catalog number for 500 ml kit: 85850 )
Penicilin-Streptomycin (P/S; 10,000 U/ml Penicilin, 10,000 µg/ml Streptomycin) (Thermo Fisher Scientific, Gibco, catalog number 15140122 ; product format: 100 ml liquid; store at -20 °C; shelf life: 12 months)
L-Glutamine (200 mM) (Thermo Fisher Scientific, Gibco, Catalog number: 25030081 ; product format: 100 ml liquid; store at -20 °C, protected from light; shelf life: 24 months)
Non-essential amino acids (NEAA, 100×) (Thermo Fisher Scientific, Gibco, catalog number: 11140035 , product format: 100 ml, store at 2-8 °C; shelf life: 12 months)
Sodium pyruvate (100 mM) (Thermo Fisher Scientific, Gibco, catalog number: 11360070 ; product format: 100 ml; store at 2-8 °C protected from light; shelf life: 12 months)
MycoZap Plus-CL (Lonza, catalog number VZA-2012 ; product format: 20 ml liquid; store at -20 °C, protected from light)
StemPro^TM Accutase^TM Cell Dissociation Reagent (Thermo Fisher Scientific, Gibco/StemPro, catalog number: A1110501 ; product format: 100 ml liquid, store at -20 °C, protected from light)
DPBS (without calcium and magnesium) (Thermo Fisher Scientific, Gibco, catalog number: 1419025 0; product format: 500 ml liquid; store at 15-30 °C; shelf life: 36 months)
ROCK inhibitor (RI), Y-27632, dihydrochloride (Enzo, CAS number: 129830-38-2; catalog number: ALX-270-333-M005 ; product format 5 mg powder; store at -20 °C; soluble in DMSO as 25 mg/ml; stability: stock solution stable for 1 month at -20 °C)
UltraPure^TM 0.5 M EDTA (Invitrogen, catalog number: 15575020 )
Bambanker (NIPPON Genetics, catalog number: BB03 )
Shandon^TM Immu-Mount^TM (Thermo Scientific^TM, catalog number: 77-86-1 ; reference number 9990402; product formal: 20 ml)
Anti-Nestin Antibody, clone 10C2 (Millipore, catalog number: MAB5326 ; Brand family: Chemicon^®)
Anti-Pax-6 Antibody (Covance, catalog number: 901301 )
SOX2 antibody (R&D Systems, catalog number: AF2018 )
DACH1 antibody (ProteinTech, catalog number: 10914-1-AP )
Anti-β-Tubulin III (TUJ-1) (Sigma-Aldrich, catalog number: T8578 )
MAP2 (Synaptic system, catalog number: 188004 )
Hoechst 33342 (Hoechst) (Invitrogen^TM, catalog number: H3570 )
16% Paraformaldehyde Aqueous Solution (PFA) (Electron Microscopy Sciences; catalog number: 50-980-487 )
Tween-20 (Sigma-Aldrich, catalog number: P9416 )
Triton^TM-X100 (Sigma-Aldrich, catalog number: T8532 )
Alexa Fluor^TM 488 donkey anti-rabbit IgG (H+L) secondary antibody (Thermo Fisher Scientific, catalog number: A-21206 )
Alexa Fluor^TM 647 donkey anti-mouse IgG (H+L) secondary antibody (Thermo Fisher Scientific, catalog number: A-31571 )
Donkey anti-goat Cy 3 (Sigma-Aldrich, catalog number: AP180C )
Donkey anti-guinea pig Cy 3 (Sigma-Aldrich, catalog number: AP193C )
SYBR^TM Green PCR Master Mix (Thermo Fisher Scientific, catalog number: 4309155 )
M-MLV Reverse Transkriptase (Invitrogen, catalog number: 28025013 )
RNeasy Mini Kit (50) (Qiagen, catalog number: 74104 )
Rnase-Free Dnase Set (50) (Qiagen, catalog number: 79254 )
Oligo(dT) 12-18 Primer (Invitrogen, catalog number: 18418012 )
dNTP-Mix (10 mM) (Invitrogen, catalog number: 18427088 )
MicroAmp^TM Optical 348-well-reaction plate with barcode (Thermo Fisher Scientific, catalog number: 4343814 )
Basic medium 1 (BM1) (see Recipes, Table 1)
BM2 (sm-) medium (see Recipes, Table 1)
M1 medium (see Recipes, Table 2)
M2 medium (see Recipes, Table 2)
M3 (sm+) medium (see Recipes, Table 2)

Equipment

Centrifuge (Eppendorf, model: 5810R )
Water bath (Thermo Fisher Scientific, Fisherbrand^TM Isotemp^TM Digital-Control Water Baths: Model 220 )
CO₂ incubator for cell culture (Thermo Fisher Scientific, model: Heraeus BBD 6 220 )
Hypoxia incubator for iPSC culture (Binder GmbH, model: Binder BCB 160 )
qPCR machine (Thermo Fisher Scientific, model: ViiA 7 )
Confocal Microscope system (Zeiss, model: Axio Imager Z1 )
Freezing container (Nalgene, model: Mr. Frosty; Corning CoolCell^TM)
-80°C Freezer (New Brunswick, model: Innova 4725 )
Laminar flow hood (BDK, Luft und Reinraumtechnik GMBH)
Sterile scissor (for example: Surgical scissors, sharp, Sigma-Aldrich, catalog number: Z265977 )
Shaker (Rocky, LTF Labortechnik)

Procedure

In general:

Work under sterile conditions, e.g., under a laminar flow hood.
Disinfect reagents and consumables before transferring under the hood.
All media should be prepared fresh and used within one week.
Do not thaw N-2 Supplement and B-27 Supplement in the water bath. Instead thaw them at room temperature (RT, 20-22 °C) for 2-4 h or in the fridge (4 °C) over night.
All media should be pre-warmed before applying to the cells. Do not keep the media at 37 °C for long periods but rather pre-warm at RT.
Culture the NPCs and iPSCs in a controlled environment with 37 °C and 5% CO₂.
1. Optional: If possible, culture the iPSCs under hypoxic conditions (37 °C, 5% CO₂, 5% O₂), which more closely mimics in vivo conditions.
2. We culture iPSCs under feeder-free conditions in either StemMACS^TM iPS-Brew XF, or mTeSR^TM1 on Matrigel-coated 6-well plates.
3. We passage iPSCs using 0.5 mM EDTA/PBS in ratios ranging from 1:4-1:12. To increase cell survival, we recommend adding ROCK inhibitor (RI) after each splitting in a concentration of 10 µM.

Step-by-step protocol for NPC generation
Day 0 (Monday): Harvesting of the iPSCs and transfer on Corning Ultra-Low Attachment 60mm/15mm dishes.
1. Prepare the basic medium 1 (BM1) (Table 1).
2. Prepare M1 medium (Table 2).
3. Choose one to two wells of iPSCs (~80% confluent).
4. Remove the media and rinse the wells twice with DPBS to remove dead cells and debris.
5. Detach cells from the plate using Accutase (1 mg/ml). Add 0.5-1 ml/well and incubate for 2-5 min at 37 °C, check visually in between.
6. Continue when colonies are mainly detaching from the plate.
7. Add 4-10 ml PBS or medium to reduce Accutase activity.
8. Optional: Mechanically detach cells using a cell spatula if cells are not completely detached by Accutase activity.
9. Transfer the cell suspension to a 15 ml Falcon tube (pool both wells), let the cells settle to the bottom (10-15 min) in water bath.
10. Optional: Centrifuge at 120 × g for 5 min (potentially more damaging but faster and results in a more solid pellet).
11. Remove as much medium as possible from the sedimented cells by pipetting (for example with a 5 ml serological pipette). Make sure not to disperse or suck up the cells.
12. Add 5 ml of M1 to the cells, transfer the cells to a non-treated Corning Ultra-Low Attachment 60 mm/15 mm dish (1:1; or X number of wells in case of high confluence).
13. Incubate at 37 °C, 5% CO₂ for 2 days.
14. Incubation with M1 will form embryoid bodies (EBs) floating in the media. If they attach at day 1 to the bottom of the Corning Ultra-Low attachment 60 mm/15 mm dish, detach them by gently pipetting using a 1 ml pipette (cut off the tip with sterile scissors!). Make sure not to shred the floating EBs. Alternatively, use a cell spatula. Keep the media in the well and gently scrape throughout the well using a cell spatula to detach EBs.
Day 2 (Wednesday): 50% media exchange to M2
1. Prepare BM2 (sm-) medium (Table 1).
2. Prepare M2 medium (Table 2).
3. Cut off the tip of a 1 ml pipet tip using a sterile scissor.
4. Transfer EBs to a 15 ml Falcon tube using a 1 ml pipette tip (cut off the tip!).
5. Optional: If some EBs attached, detach EBs using a cell spatula.
6. Let EBs settle for 15 min in the water bath at 37 °C.
7. Remove 50% of M1 and add 50% of M2 instead.
  Optional: Remove all M1 and add 100% M2 (but potentially more damaging for the cells).
8. Transfer the EBs back to the same Corning Ultra-Low Attachment 60 mm/15 mm dish using a 1 ml pipette tip (cut off the tip using a sterile scissor!).
Day 3 (Thursday): 100% media exchange to M2
1. Prepare M2 medium (Table 2).
2. Cut off the tip of a 1 ml pipet tip using a sterile scissor.
3. Transfer EBs to a 15 ml Falcon tube using a 1 ml pipette tip (cut off the tip!).
4. Optional: If necessary, detach EBs using a cell spatula as described before.
5. Let EBs settle for 15 min in the water bath at 37 °C.
6. Exchange the medium completely to 100% of M2 medium (5-6 ml final volume).
7. Transfer EBs back to the same Corning Ultra-Low Attachment 60 mm/15 mm dish using a 1 ml pipette tip (cut off the tip using a sterile scissor!).
Day 4 (Friday): 100% media exchange to M3 (sm+) and preparation of Matrigel-coated plates
1. Prepare M3 (sm+) medium (Table 2).
2. Cut off the tip of a 1 ml pipet tip using a sterile scissor.
3. Transfer EBs to a 15 ml Falcon tube using a 1 ml pipette tip (cut off the tip!).
4. Optional: If necessary, detach EBs using a cell spatula as described before.
5. Let EBs settle for 15 min in the water bath at 37 °C.
6. Exchange the media completely to 100% of M3 (sm+) medium (5-6 ml final volume).
7. Transfer EBs back to the same Corning Ultra-Low Attachment 60 mm/15 mm dish using a 1 ml pipette tip (cut off the tip using a sterile scissor!).
8. Coat a 6-well plate with Matrigel (procedure described separately) as preparation for day 7.
Day 7 (Monday): Transfer the cells to Matrigel-coated plates
1. Prepare M3 (sm+) medium (Table 2).
2. Transfer EBs from the Corning Ultra-Low Attachment 60 mm/15 mm dish to a 15 ml Falcon tube. Use a 1 ml tip (cut off the tip!).
  If necessary, detach neural tube-like formations using a cell spatula as described for EBs.
3. Let EBs settle down in the water bath at 37 °C (10-15 min).
4. Remove old media.
5. Add new sm+ medium.
6. Shred the cell formations by pipetting 5-10 times using a normal 1 ml tip.
7. Transfer the whole suspension to the Matrigel-coated 6-well plate, distribute equally to 2-X wells depending on the amount of EBs.
8. Fill up to 2 ml sm+ each 6-well.
9. Add ROCK inhibitor (RI) (10 µM final concentration).
  Note: To increase cell survival, we recommend adding RI to the cells for the first 1-2 splittings. Afterwards, RI is not needed!
10. Check the next day, NPC-like cells should be already visible (see Figure 1A–right image, and Figure 1E).
11. Try to keep the cells in the first well for 1 week.
12. If necessary, split the cells as described in the maintenance protocol.
Note: NPCs should appear homogenous after 4-5 passages, expressing NESTIN, PAX6, and SOX2. NPCs usually also express the immature pan-neuronal marker TUJ1. Spontaneous differentiation can occur, and some cells can express the neuronal marker MAP2. Cells do not necessarily need to be cultured in 6-well plates.

Figure 1. Generation and characterization of human iPSC-derived NPCs. A. Representative images of neurospheres, neuroepithelial cells, and neural progenitor cells (NPCs). B. Image of a matrigel coated well. Scale bar: 200 µm. C. Immunocytochemistry of NPCs obtained from the control iPSC line XM001 (Wang et al. 2018) stained for the neural progenitor markers NESTIN, DACH1, PAX6, and SOX2. Spontaneous differentiation of cells expressing TUJ1 or MAP2 can be present. Scale bar: 100µm. D. Quantitative real-time reverse transcription PCR (qRT-PCR) of neural progenitor markers SOX1, NESTIN, PAX6, and SOX2, and of pluripotency-associated markers OCT4, NANOG, DNMT3B, and DPPA4. Transcription levels in NPCs were normalized using GAPDH housekeeper gene (mean=SD +/-; n=3 technical replicates) and reported in relation to the transcription level of the respective control iPSC line XM001. E. Representative images of neural progenitor cells (NPCs) from passage 3 (p3) and passage 7 (p7) demonstrating the change in morphology towards homogenous NPC cultures. Scale bar: 100 µm.
Matrigel preparation
1. Thaw frozen Matrigel (stored at -20 °C) OVERNIGHT (ON) on ice at +4 °C.
2. Check protein concentration (stock concentration) of Matrigel as provided in Lot datasheet.
3. Calculation: Add a specific volume (=x) of cold KnockOut-DMEM to the 10 ml thawed Matrigel in the vial to dilute it to 5 mg/ml final concentration. The stock concentration of your vial (= y) should be written on the lot datasheet. Calculate the needed volume using the formula: x = y * 2-10 ml.
4. Perform next steps under the hood and on ice!
5. Prepare a pre-chilled 50 ml Falcon tube with specific volume of cold KnockOut-DMEM.
6. Prepare pre-chilled 15 ml Falcon tubes on ice labeled with 1 M.
7. Transfer Matrigel quickly to KnockOut-DMEM and mix carefully.
8. Aliquot 1 ml of the diluted Matrigel in each pre-chilled 15 ml Falcon tube.
9. Store Aliquots immediately at -20 °C.
10. Final concentration in 6/12-well-plates: 200 µg/ml.
Coating plates with Matrigel
1. Transfer 30 ml cold KnockOut-DMEM into a 50 ml Falcon tube.
2. Dilute 1 ml aliquot 1:30 in cold KnockOut-DMEM.
3. Resuspend the 1 ml Matrigel aliquot (15 ml Falcon tube, -20 °C) with 5 ml of the 30 ml cold KnockOut-DMEM in the 15 ml Falcon tube until pellet is resolved! (It may take a while).
4. 1 ml Matrigel aliquot resuspended in 30 ml cold KnockOut-DMEM as described in C2 is enough for 4 plates.
  1. 6-well: 1.25 ml.
  2. 12-well: 500 µl.
  3. 24-well: 300 µl.
5. Add Matrigel-medium to the wells (see point 4).
6. Polymerization:
  1. Store at 4 °C in the fridge, ON (preferentially!).
  2. 2 h at 37 °C is possible.
7. Check polymerization in phase contrast before use! The evenly distributed formation of an extracellular matrix should be visible (Figure 1B). Coated plates can be stored for 1-2 weeks (4 °C). For storage seal the plates with Parafilm.
8. Before use, pre-warm the plate either at RT or 37 °C.
Maintenance of NPC cultures
1. Media needs to be changed every 2^nd day.
2. Media should be pre-warmed before applying to the cells. Do not keep media at 37 °C for long periods but rather pre-warm at RT.
3. Typically, cells were split using Accutase in ratios of 1:3 up to 1:10 every 4-5 days depending on the cell density.
Splitting NPCs
1. Aspirate growth media.
2. Add 500 μl Accutase and incubate for 2-5 min at RT or 37 °C if cells do not detach easily.
3. Dilute Accutase activity by addition of 2 ml sm- (without any supplementation) or PBS.
4. Gently detach the cells by pipetting.
5. Transfer the cells to a 15 ml Falcon tube and centrifuge at 200 × g for 3 min at RT.
6. In the meantime, prepare Matrigel-coated plates for plating the cells.
  1. Aspirate Matrigel-mix.
  2. Add 1 ml sm+ and store in the incubator until further use.
  3. Fill blank wells with 2 ml DPBS.
    Note: Matrigel coating should not dry out.
7. Aspirate the supernatant.
8. Resuspend the pellet in sm+ medium.
9. Distribute cells to Matrigel-coated 6-well plates.
10. Fill up with media to 2 ml sm+.
  Note: To increase cell survival, we recommend adding RI (10 µM) to the cells for the first 1-2 splittings. Afterwards, RI is not needed!
Freezing NPCs
1. Detach NPCs according to the splitting procedure.
2. Resuspend NPCs in 0.5 ml of sm+. Add freezing medium (2× sm+ freeze:sm+, 1:1).
  Note: 10 ml of 2× sm+ freeze is prepared by mixing 2 ml of sm+, 6 ml of KnockOut-SR, and 2 ml of DMSO.
3. Alternatively, use commercial freezing media according to manufacturer’s protocol.
  Note: For example, Bambanker (Nippon Genetics, catalog number: BB03 ).
4. Transfer the resuspended NPCs into a cryovial and place the vials at -80 °C in a cryo-freezing container.
  Note: Use a freezing container such as Mr. Frosty^TM (Nalgene) to freeze the cells, which allows slow freezing at a rate of -1 °C per minute.
5. Store NPCs at -80 °C or in a liquid nitrogen tank for long term storage (1-3 years).
Thawing NPCs
1. Quickly but gently thaw the cryovial containing NPCs in a 37 °C pre-warmed water bath.
2. Transfer NPCs into a 15 ml Falcon tube set with 1 ml of sm+ and up to 10 ml of pre-warmed PBS.
3. Centrifuged the cells at 200 × g for 3 min.
4. Remove the supernatant and resuspend NPCs in sm+ medium.
5. Seed NPCs on previously prepared Matrigel-coated plates 1:1 (see Coating plates with Matrigel). Note: Add 10 µM RI after thawing to support cell survival.
Characterization of NPCs by immunofluorescence
1. After 4-6 passages, seed NPCs on Matrigel-coated 24-well plates containing 12 mm coverslips. When reaching approximately 80% of confluence, rinse NPCs with PBS, and fix the cells with a 4% paraformaldehyde (PFA)/PBS solution for 15 min at RT.
2. Remove the PFA and rinse NPCs with PBS calcium/magnesium free (PBS -/-) 3 times for 5 min.
3. Add blocking solution to the cells for 1 h at RT.
  Note: Blocking solution is prepared with 10% donkey serum and 1% Triton X-100 in PBS -/- with 0.1% Tween-20.
4. Incubate the cells with specific primary antibodies overnight at 4 °C on an orbital shaker (60-80 rpm).
  Note: Dilute primary antibody in blocking solution. Following antibodies are commonly used in our laboratory: NESTIN (Millipore, 1:200), PAX6 (Covance, 1:200), SOX2 (Santa Cruz, 1:100), DACH1 (ProteinTech, 1:100), TUJ-1 (Sigma-Aldrich, 1:1,000), MAP2 (Synaptic system, 1:1,000).
5. Rinse the cells with PBS -/-, 3 times for 5 min.
6. Incubate the cells with a specific secondary antibody and Hoechst staining (1:2500) for nucleus visualization for at least 1 h at RT.
  Note: Dilute secondary antibodies 1:300 using blocking solution. Following secondary antibodies are commonly used in our laboratory: Alexa Fluor^TM 488 donkey anti-rabbit IgG (H+L) (Thermo Fisher Scientific), Alexa Fluor^TM 647 donkey anti-mouse IgG (H+L) (Thermo Fisher Scientific), donkey anti-goat Cy 3 (Sigma-Aldrich) and donkey anti-guinea pig Cy 3 (Sigma-Aldrich).
7. Rinse the cells with PBS -/-, 3 times for 5 min.
8. Invert coverslips and mount them to a glass slide using mounting medium (IMMU-MOUNT^TM or similar). After the mounting medium is dry the samples can be analyzed by confocal imaging.
Characterization of NPCs by quantitative real-time reverse transcription PCR (qRT-PCR)
1. Prepare SYBR Green PCR Master Mix according to the manufacturer’s description.
2. Pipette the PCR master mix and the cDNA samples into the 384-Well Optical Reaction Plates (Applied Biosystems).
  Note: RNA was extracted from cell pellets using the RNeasy Mini Kit (50) from Qiagen according to the manufacturers protocol. cDNA was generated using the Moloney Murine Leukemia Virus (M-MLV) Reverse Transcriptase kit from Thermo Fisher Scientific according to the manufacturers protocol. For each target gene, cDNA samples and negative controls should be measured in biological triplicates.
3. Set the PCR cycle conditions as follows: 1 cycle 50 °C 2 min, 1 cycle 95 °C 10 min, 40 cycles 95 °C 15 s  60 °C 30 s  72 °C 30 s, 1 cycle 72 °C 10 min.
4. Primers used were:
  For OCT4
  F: GTGGAGGAAGCTGACAACAA and R: ATTCTCCAGGTTGCCTCTCA
  For NANOG
  F: CCTGTGATTTGTGGGCCTG and R: GACAGTCTCCGTGTGAGGCAT
  For SOX2
  F: GTATCAGGAGTTGTCAAGGCAGAG and R: TCCTAGTCTTAAAGAGGCAGCAAAC
  For DNMT3B
  F: GCTCACAGGGCCCGATACTT and R: GCAGTCCTGCAGCTCGAGTTTA
  For DPP4
  F: TGGTGTCAGGTGGTGTGTGG and R: CCAGGCTTGACCAGCATGAA
  For VIM
  F: GGAGCTGCAGGAGCTGAATG and R: GACTTGCCTTGGCCCTTGAG
  For NESTIN
  F: TTCCCTCAGCTTTCAGGAC and R: GAGCAAAGATCCAAGACGC
  For PAX6
  F: GAATTCTGCAGACCCATGC and R TCTCGTAATACCTGCCCAG
  For SOX1
  F: TTGGCATCTAGGTCTTGGCTCA and R: CGGGCGCACTAACTCAGCTT
  For SOX2
  F: GTATCAGGAGTTGTCAAGGCAGAG and R: TCCTAGTCTTAAAGAGGCAGCAAAC
  For GAPDH
  F: CTGGTAAAGTGGATATTGTTGCCAT and R: TGGAATCATATTGGAACATGTAAACC

Data analysis

Fluorescent images were visualized using the Zeiss Axio Imager Z1 confocal microscope in combination with AxioVision V4.6.3.0 software. Images were merged either directly during image acquisition using AxioVision V4.6.3.0 software, or afterwards using Adobe Photoshop CS6 (Adobe, California, USA).

Gene expression analysis was performed by qRT-PCR using SYBR Green PCR Master Mix and the ViiA^TM 7 Real-Time PCR System (Applied Biosystems, California, USA). Relative transcript levels of each gene were calculated based on the 2^−ΔΔCT method. Data were normalized to the housekeeping gene GAPDH and presented as mean LOG2 ratios in relation to control iPSCs.

Recipes

Media formulation (Table 1 and Table 2):

1. All media should be prepared fresh and used within one week.

2. Do not thaw N-2 Supplement and B-27 Supplement in the water bath. Instead thaw them at RT for 2-4 h or in the fridge (4 °C) over night.

3. All media should be pre-warmed before applying to the cells. Do not keep media at 37 °C for long periods but rather pre-warm them at RT.

Table 1. Basic media formulation

Medium	Components	Volume	Stock conc.	Final conc.
Basic Medium 1 (BM1)	KnockOut-DMEM	40 ml	1×	1×
	KnockOut-SR	10 ml	5×	1×
	Pen/Strep	500 µl	10 mg/ml; 10.000 U/ml	0.1 mg/ml; 100 U/ml
	Glutamine	500 µl	200 mM	2 mM
	NEAA	500 µl	100×	1×
	Pyruvate	500 µl	100 mM	1 mM
	MycoZap	100 µl	500×	1×
Basic Medium sm-(base for sm+)	DMEM/F12	240 ml	1×	0.5×
	Neurobasal	240 ml	1×	0.5×
	N-2 Supplement	2.5 ml	100×	0.5×
	B-27 Supplement without vitamin A	5 ml	50×	0.5×
	Pen/Strep	5 ml	10 mg/ml; 10.000 U/ml	0.1 mg/ml;100 U/ml
	Glutamine	5 ml	200 mM	2 mM
	MycoZap	1 ml	500×	1×

Table 2. Culture media formulation

Medium	Components	Volume	Stock conc.	Final conc.
Medium 1 (M1); day 0-day 2	BM1	10 ml	1×	1×
	CHIR	5 µl	6 mM	3 µM
	SB	10 µl	10 mM	10 µM
	Dorsomorphin	2 µl	5 mM	1 µM
	Purmorphamine	7.69 µl	0.65 mM	500 nM
Medium 2 (M2); day 2-day 4	sm^-	10 ml	1×	1×
	CHIR	5 µl	6 mM	3 µM
	SB	10 µl	10 mM	10 µM
	Dorsomorphin	2 µl	5 mM	1 µM
	Purmorphamine	7.69 µl	0.65mM	500 nM
M3/sm+(maintenance of NPCs)	sm^-	10 ml	1×	1×
	CHIR	5 µl	6 mM	3 µM
	Purmorphamine	7.69 µl	0.65 mM	500 nM
	Vitamin C	7.5 µl	200 mM	150 µM

Acknowledgments

We acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) (PR1527/5-1 to A.P.), Spark-Berlin Institute of Health (BIH Validation Funds to A.P.), National Science Center, Poland (No. 2016/22/M/NZ2/00548; No. 2017/27/B/NZ1/02401 to P.L), the United Mitochondrial Disease Foundation (UMDF to A.P.), and the German Federal Ministry of Education and Research (BMBF) (AZ.031A318 & 031L0211 to A.P.). The original research paper was: Lorenz et al.(2017).

Competing interests

The authors declare no competing financial and non-financial competing interests.

Ethics

The study was approved by the ethic committee of the Medical Faculty of Heinrich Heine University (study number 2019/681).

References

Beckervordersandforth, R. (2017). Mitochondrial Metabolism-Mediated Regulation of Adult Neurogenesis. Brain Plast 3(1): 73-87.
Bénit, P., Schiff, M., Cwerman-Thibault, H., Corral-Debrinski, M. and Rustin, P. (2016). Drug development for mitochondrial disease: recent progress, current challenges, and future prospects. Expert Opin Orphan Drugs 4: 83-92.
Chambers, S. M., Fasano, C. A., Papapetrou, E. P., Tomishima, M., Sadelain, M. and Studer, L. (2009). Highly efficient neural conversion of human ES and iPS cells by dual inhibition of SMAD signaling. Nat Biotechnol 27(3): 275-280.
Cunnane, S. C., Trushina, E., Morland, C., Prigione, A., Casadesus, G., Andrews, Z. B., Beal, M. F., Bergersen, L. H., Brinton, R. D., de la Monte, S., Eckert, A., Harvey, J., Jeggo, R., Jhamandas, J. H., Kann, O., la Cour, C. M., Martin, W. F., Mithieux, G., Moreira, P. I., Murphy, M. P., Nave, K. A., Nuriel, T., Oliet, S. H. R., Saudou, F., Mattson, M. P., Swerdlow, R. H. and Millan, M. J. (2020). Brain energy rescue: an emerging therapeutic concept for neurodegenerative disorders of ageing. Nat Rev Drug Discov 19(9): 609-633.
Elkabetz, Y., Panagiotakos, G., Al Shamy, G., Socci, N. D., Tabar, V. and Studer, L. (2008). Human ES cell-derived neural rosettes reveal a functionally distinct early neural stem cell stage. Genes Dev 22(2): 152-165.
Inak, G., Lorenz, C., Lisowski, P., Zink, A., Mlody, B. and Prigione, A. (2017). Concise Review: Induced Pluripotent Stem Cell-Based Drug Discovery for Mitochondrial Disease. Stem Cells 35(7): 1655-1662.
Khurana, V., Tardiff, D. F., Chung, C. Y. and Lindquist, S. (2015). Toward stem cell-based phenotypic screens for neurodegenerative diseases. Nat Rev Neurol 11(6): 339-350.
Kim, D. S., Lee, J. S., Leem, J. W., Huh, Y. J., Kim, J. Y., Kim, H. S., Park, I. H., Daley, G. Q., Hwang, D. Y. and Kim, D. W. (2010). Robust enhancement of neural differentiation from human ES and iPS cells regardless of their innate difference in differentiation propensity. Stem Cell Rev Rep 6(2): 270-281.
Lancaster, M. A., Renner, M., Martin, C. A., Wenzel, D., Bicknell, L. S., Hurles, M. E., Homfray, T., Penninger, J. M., Jackson, A. P. and Knoblich, J. A. (2013). Cerebral organoids model human brain development and microcephaly. Nature 501(7467): 373-379.
Li, W., Sun, W., Zhang, Y., Wei, W., Ambasudhan, R., Xia, P., Talantova, M., Lin, T., Kim, J., Wang, X., Kim, W. R., Lipton, S. A., Zhang, K. and Ding, S. (2011). Rapid induction and long-term self-renewal of primitive neural precursors from human embryonic stem cells by small molecule inhibitors. Proc Natl Acad Sci U S A 108(20): 8299-8304.
Lorenz, C., Lesimple, P., Bukowiecki, R., Zink, A., Inak, G., Mlody, B., Singh, M., Semtner, M., Mah, N., Aure, K., Leong, M., Zabiegalov, O., Lyras, E. M., Pfiffer, V., Fauler, B., Eichhorst, J., Wiesner, B., Huebner, N., Priller, J., Mielke, T., Meierhofer, D., Izsvak, Z., Meier, J. C., Bouillaud, F., Adjaye, J., Schuelke, M., Wanker, E. E., Lombes, A. and Prigione, A. (2017). Human iPSC-Derived Neural Progenitors Are an Effective Drug Discovery Model for Neurological mtDNA Disorders. Cell Stem Cell 20(5): 659-674 e659.
Lorenz, C. and Prigione, A. (2017). Mitochondrial metabolism in early neural fate and its relevance for neuronal disease modeling. Curr Opin Cell Biol 49: 71-76.
Paul, S. M., Mytelka, D. S., Dunwiddie, C. T., Persinger, C. C., Munos, B. H., Lindborg, S. R. and Schacht, A. L. (2010). How to improve R&D productivity: the pharmaceutical industry’s grand challenge.Nat Rev Drug Discov 9: 203-214.
Readhead, B., Hartley, B. J., Eastwood, B. J., Collier, D. A., Evans, D., Farias, R., He, C., Hoffman, G., Sklar, P., Dudley, J. T., Schadt, E. E., Savic, R. and Brennand, K. J. (2018). Expression-based drug screening of neural progenitor cells from individuals with schizophrenia.Nat Commun 9(1): 4412.
Reinhardt, P., Glatza, M., Hemmer, K., Tsytsyura, Y., Thiel, C. S., Hoing, S., Moritz, S., Parga, J. A., Wagner, L., Bruder, J. M., Wu, G., Schmid, B., Ropke, A., Klingauf, J., Schwamborn, J. C., Gasser, T., Scholer, H. R. and Sterneckert, J. (2013). Derivation and expansion using only small molecules of human neural progenitors for neurodegenerative disease modeling. PLoS One 8(3): e59252.
Takahashi, K., Tanabe, K., Ohnuki, M., Narita, M., Ichisaka, T., Tomoda, K. and Yamanaka, S. (2007). Induction of pluripotent stem cells from adult human fibroblasts by defined factors. Cell 131(5): 861-872.
Vierbuchen, T., Ostermeier, A., Pang, Z. P., Kokubu, Y., Sudhof, T. C. and Wernig, M. (2010). Direct conversion of fibroblasts to functional neurons by defined factors. Nature 463(7284): 1035-1041.
Walter, J., Bolognin, S., Antony, P. M. A., Nickels, S. L., Poovathingal, S. K., Salamanca, L., Magni, S., Perfeito, R., Hoel, F., Qing, X., Jarazo, J., Arias-Fuenzalida, J., Ignac, T., Monzel, A. S., Gonzalez-Cano, L., Pereira de Almeida, L., Skupin, A., Tronstad, K. J., Schwamborn, J. C. (2019). Neural Stem Cells of Parkinson’s Disease Patients Exhibit Aberrant Mitochondrial Morphology and Functionality. Stem Cell Reports 12(5): 878-889.
Wang, X., Sterr, M., Burtscher, I., Chen, S., Hieronimus, A., Machicao, F., Staiger, H., Haring, H. U., Lederer, G., Meitinger, T., Cernilogar, F. M., Schotta, G., Irmler, M., Beckers, J., Hrabe de Angelis, M., Ray, M., Wright, C. V. E., Bakhti, M. and Lickert, H. (2018). Genome-wide analysis of PDX1 target genes in human pancreatic progenitors. Mol Metab 9: 57-68.
Zheng, X., Boyer, L., Jin, M., Mertens, J., Kim, Y., Ma, L., Ma, L., Hamm, M., Gage, F. H. and Hunter, T. (2016). Metabolic reprogramming during neuronal differentiation from aerobic glycolysis to neuronal oxidative phosphorylation. Elife 5: e13374.