Materials and Reagents

Note: For a complete list of reagents, please refer to Guo et al. (2018).

Pipette tips (MidSci, catalog number: AVR96 for 200 μl tips, AVR96-12 for 1.2 ml tips)
Micropore tape (3M, catalog number: 1530-0)
Kimwipes (Fisher Scientific, catalog number: 06-666A)
Plastic blue pestle (Fisher Scientific, catalog number: 12-141-368)
24-well culture plate (Fisher Scientific, catalog number: 07-200-686)
Nitrocellulose membrane (Bio-Rad, catalog number: 1620112)
Cycloheximide (Sigma-Aldrich, catalog number: C4859)
MG132 (Sigma-Aldrich, catalog number: M7449)
Rabbit polyclonal anti-MYC2 (Guo et al., 2018)
Rabbit polyclonal anti-FLAG (Sigma-Aldrich, catalog number: F7425; RRID: AB_439687)
Goat anti-rabbit IgG-HRP secondary antibody (Thermo Fisher, catalog number: 31460)
Ponceau S (Sigma-Aldrich, catalog number: P7170-1L)
Liquid nitrogen (Chemstore on campus)
DMSO (Fisher Scientific, catalog number: D159-4)
Linsmaier and Skoog packet (CaissonLabs, catalog number: LSP03-1LT)
Sucrose (Fisher Scientific, catalog number: BP220-10)
Tris base (Fisher Scientific, catalog number: BP152-10)
SDS (Fisher Scientific, catalog number: BP166-5)
Glycerol (Fisher Scientific, catalog number: BP229-1)
Bromophenol blue (Fisher Scientific, catalog number: BP115-25)
2-Mercaptoethanol (Fisher Scientific, catalog number: BP176-100)
½ MS liquid medium (see Recipes)
2x SDS sample buffer (see Recipes)

Equipment

Sterilized forceps
Sartorius Entris Analytical Balance
P1000 pipettor
Black & Decker Electric drill
Sterile culture hood
Microcentrifuge
Mini-Protein Tetra Cell (Bio-Rad, catalog number: 1658001EDU)
Trans-Blot Turbo system (Bio-Rad, catalog number: 1704155)

Software

ImageJ (https://imagej.net/Fiji), a friendly tutorial provided on the website for new users

Procedure

For MYC2 half-life measurement in WT and fer mutant
Note: Steps A1 to A4 are carried out in a sterile culture hood.
1. Sterilize and germinate seeds on ½ MS plates for 7 days, vertically with constant light at 100 μmol m^-2 s^-1, 22 °C.
2. Add 1 ml of liquid ½ MS medium to each well of a 24-well plate, 5 wells for each genotype.
3. With a pair of sterilized forceps, gently transfer 50 mg of whole seedlings to the wells.
  Note: The number of seedlings for 50 mg can be predetermined by weighing the seedlings.
4. Add 5 μl of 10 mM MG132 to each well. The final concentration of MG132 is 50 μM.
5. Seal the plate with Micropore tape and incubate at room temperature with gentle rocking at 40 RPM, for 16 h.
6. Gently remove the liquid from the well with a P1000 pipettor and wash the seedlings with 1 ml fresh ½ MS liquid medium. Repeat the process for a total of 5 washes.
7. Gently add 1 ml fresh ½ MS liquid medium to each well, add Cycloheximide to 4 wells, and add the same volume of 100% DMSO to 1 well as control for each genotype, the final concentration of Cycloheximide is 200 μM.
8. Collect the seedlings at 30-min intervals by gently picking out the seedlings with a pair of forceps. Dab dry on Kimwipes. Gently put the seedlings into a microtube and freeze in liquid nitrogen.
9. For Western blotting to estimate the amount of MYC2 protein, add 150 μl of 2x SDS sample buffer to 50 mg of frozen seedlings and grind the tissue for about 30 s with a brief stop every 10 s, with a blue pestle mounted to an electric drill machine.
10. Vortex and boil the ground samples for 5 min and cool down on ice for 1 min.
11. Spin the cooled samples for 5 min at full speed in a microcentrifuge and load 20 μl to SDS-PAGE gel. The Mini-Protein Tetra Cell and Trans-Blot Turbo system are used for protein gel electrophoresis and transfer.
12. Conduct Western blotting with proper primary and secondary antibodies to detect protein levels.
For the MYC2-FLAG and MYC2^A12-FLAG half-life in transgenic plants
1. Sterilize and germinate seeds on Gentamycin containing plates (75 μg/ml) for 7 days.
2. Add 1 ml fresh ½ MS liquid medium to each well of a 24-well plate, 5 wells per genotype.
3. With a pair of forceps, gently transfer 50 mg of seedlings to the wells. Leave the plate for 2 h to minimize the effect of mechanical touch.
4. Add 1 ml ½ MS liquid containing 400 μM Cycloheximide to 4 wells and 1 ml ½ MS liquid containing the same volume of DMSO to 1 well. Gently rock the plate a few times to mix. The final concentration of Cycloheximide is 200 μM.
5. Then follow Steps A8-A12 described above.
For a comprehensive read on Western blotting, please refer to the manufacturer’s instructions (bulletin#2895 at https://www.bio-rad.com).

Data analysis

After Western blotting, scan the film using a flat-bed scanner. Stain the membrane using Ponceau S and scan the stained membrane (Alternatively, this step can be done right after transfer. The membrane is then washed with distilled water before blotting). Use ImageJ to measure the intensity of the protein bands of interest and the intensity of Rubisco from the staining. Calculate the ratios of the protein of interest over the corresponding Rubisco. The protein half-life is the time when the ratio decreases by half. For an example, see Figures 3C and 3D in Guo et al. (2018). Alternatively, a housekeeping protein whose level doesn’t change dramatically due to Cycloheximide treatment can be monitored by western blotting and used as a reference instead of Rubisco.

Recipes

½ MS liquid medium
In 2 L of Millipore water, dissolve one Linsmaier and Skoog packet, then add 20 g of sucrose till it dissolves completely; autoclave at 121 °C and 15 psi for 15 min. Cool it down before use
2x SDS sample buffer
To make 50 ml of 2x SDS buffer, mix 10 ml of 0.5 M Tris pH 6.8, 10 ml of 100% glycerol, 10 ml of 20% SDS, 0.02% (w/v) Bromophenol blue, and 700 μl of 2-Mercaptoethanol, bring the volume up to 50 ml with water

Acknowledgments

The authors thank Dr. Trevor Nolan for editing the manuscript. The research was supported by Signature Research Initiative of the College of Liberal Arts and Sciences and Plant Sciences Institute at Iowa State University.

Competing interests

Hongqing Guo and Yanhai Yin are co-inventors on the patent titled "Modulation of receptor-like kinases for promotion of plant growth", US9512440B2.

References

Guo, H., Nolan, T. M., Song, G., Liu, S., Xie, Z., Chen, J., Schnable, P. S., Walley, J. W. and Yin, Y. (2018). FERONIA receptor kinase contributes to plant immunity by suppressing jasmonic acid signaling in Arabidopsis thaliana. Curr Biol 28(20): 3316-3324. e6.
Jeong, J. S., Jung, C., Seo, J. S., Kim, J. K. and Chua, N. H. (2017). The deubiquitinating enzymes UBP12 and UBP13 positively regulate MYC2 levels in jasmonate responses. Plant Cell 29(6): 1406-1424.
Jung, C., Zhao, P., Seo, J. S., Mitsuda, N., Deng, S. and Chua, N. H. (2015). PLANT U-BOX PROTEIN10 regulates MYC2 stability in Arabidopsis. Plant Cell 27(7): 2016-2031.