Materials and Reagents

RAW 264.7 cells (ATCC, TIB-71 )
E. coli CFT073 or other strains of bacteria
LB broth (Beckton Dickinson, catalog number: 244610 )
Agar (Beckton Dickinson, catalog number: 214010 )
RPMI1640 (Life Technologies, catalog number: 11875-093 )
Gentamicin 50 mg/ml (Life Technologies, catalog number: 15750-102 )
PBS (pH 7.4)
LB plates (see Recipes)
Certified, heat inactivated fetal bovine serum (FBS) (Life Technologies, catalog number: 10082139 ) (see Recipes)
100x penicillin, streptomycin and glutamine (PSG) (Life Technologies, catalog number: 10378-016 ) (see Recipes)
Saponin (Sigma-Aldrich, catalog number: 8047-15-2) (see Recipes)

Equipment

24 well plates (Corning, Costar^®, catalog number: 3524 )
0.22 micron filter (Millipore, catalog number: SCGP00525 )
37 °C, 5% CO₂ incubator
Sorvall Legend RT table top centrifuge
Shimadzu UV-1601PC Spectrophotometer

Procedure

Culture RAW 264.7 cells in RPMI1640 with 10% heat inactivated fetal bovine serum and 1x penicillin streptomycin and glutamine at 37 °C in a CO₂ incubator.
Count the cells using standard procedures and seed 2 x 10⁵ RAW cells/well, by adding 1 ml per well in a 24 well plate. Set up 2 plates; one for T0 and another for T2 and incubate in a CO₂ incubator.
Start overnight cultures of CFT073 in 3 ml of LB broth in a 10 ml polypropylene tube and incubate at 37 °C shaking at 200 rpm. Use appropriate culture media when using other bacterial strains.
Determine the multiplicity of infection (MOI = number of bacteria per RAW 264.7 cell) and alter the inocula preparation accordingly. For an MOI of 10, add 2 x 10⁶ cfu of E. coli CFT073 for a well containing 2 x 10⁵RAW cells.
Pellet the bacterial cells from the 3 ml culture by centrifuging at 4,000 rpm for 10 min in a Sorvall centrifuge. Resupend the pellet in 3 ml PBS.
Adjust the OD₆₀₀of broth culture to 4 in PBS, by measuring the optical density of a 1:10 diluted culture in a spectrophotometer and calculating the optical density of undiluted culture.
Dilute 1:100 in PBS.
Dilute 1:10 in RPMI 1640 without antibiotics.
Wash RAW cells twice with PBS.
Add 1 ml of diluted culture to each well; three technical replicates per sample and three biological replicates of the entire experiment are recommended. Use the same set up for T0 and T2 plates.
Incubate at 37 °C, 5% CO₂ for 30 min.
Aspirate supernatant and wash 3 times with PBS.
Add 1 ml of RPMI 1640 with gentamicin (200 µg/ml) per well.
Incubate the T0 plate at 37 °C, 5% CO₂ for 15 min.
Incubate the T2 plate at 37 °C, 5% CO₂ for 2 h.
After 15 min or 2 h, remove the supernatants entirely by aspiration.
Lyse cells with 1 ml of filter sterilized 1% saponin in H₂O per well by incubating for 10 min at room temperature followed by vigorous pipetting. Determine the extent of lysis using a standard inverted microscope.
Plate undiluted and -2 dilution for T0 and T2 time points on LB plates.
% Killing = [(T0-T2)/T0]*100

Recipes

LB plates
Add 15 g of agar to 1 L of LB broth
FBS and PSG
Added at 10% and 1x final concentration, respectively, to RPMI1640
Saponin
Dissolved in autoclaved double distilled water and filter sterilized using a 0.22 μM filter

Acknowledgments

This protocol was adapted from the publication: Subashchandrabose et al. (2013).

References

Subashchandrabose, S., Smith, S. N., Spurbeck, R. R., Kole, M. M. and Mobley, H. L. (2013). Genome-wide detection of fitness genes in uropathogenic Escherichia coli during systemic infection. PLoS Pathog 9(12): e1003788.